SBC 5.700" 4340 EAGLE H-BEAM CONNECTING RODS with ARP 2000 BOLTS

SBC 5.700" 4340 EAGLE H-BEAM CONNECTING RODS with ARP 2000 BOLTS
Click To Enlarge
  • Item #: CRS5700B3D2000

SMALL BLOCK CHEVY 5.700" 4340 EAGLE H-BEAM CONNECTING RODS with ARP 2000 BOLTS
SET OF 8

PART# - CRS5700B3D2000

Free your engine's horsepower on the wings of Eagle H-beam connecting rods. Their 2-piece, forged, vacuum-degassed, 4340-certified steel construction provides outstanding strength, while still weighing much less than stock rods. Each rod is multi-stage heat-treated, X-rayed, sonic-tested, magnafluxed, 100 percent machined, and then shot-peened to stress-relieve the metal.



The rods have precision cap alignment sleeves to positively locate each rod cap, silicon bronze bushings for floating pin models, and are available in stroker models that allow additional cam-to-rod clearance for large stroke combinations. They come standard with 190,000 psi rated ARP 8740 and 230,000 psi rated ARP 2000 rod bolts, or 265,000 psi rated ARP L-19 bolts as upgrades. Instructions and rod bolt lubrication are included.

5700B3D2000 SPECS
Connecting Rod Length Center to Center (in): 5.700 in.
Connecting Rod Beam Style: H-beam
Connecting Rod Material: Forged 4340 steel
Connecting Rod Finish: Shot-peened
Wrist Pin Style: Floating
Clearanced for Stroker: No
Cap Retention Style: Cap screw
Connecting Rod Bolt Brand: ARP
Connecting Rod Bolt Diameter: 7/16 in.
Connecting Rod Bolt Material: ARP2000 ALLOY
Fastener Yield Strength (psi): 200,000 psi
Connecting Rod Bolt Head Style: 12-point
Approximate Connecting Rod Weight (g): 630
Rod Journal Diameter (in): 2.100 in.
Big End Bore Diameter (in): 2.2250 in.
Pin End Bore Diameter: 0.927 in.
Big End Width (in): 0.940
Pin End Width (in): 1.060
Advertised Horsepower Rating: 1100 hp
Weight Matched Set: Yes
Remanufactured: No
Magnafluxed: Yes
Quantity: Sold as a set of 8.

Notes: Custom pistons required when using longer than stock connecting rods.
 
These Rods NORMALLY DO NOT Clear Standard Base Circle Cam at a 3.75" Or Longer Stroke without Additional Clearancing of the Large End of the Rod (proper clearance still should be verified for your specific application prior to final installation)
 
 
 ROD CLEARANCING IS AVAILABLE FOR ADDITIONAL CHARGE.

We ship around the world!

**NOTE: shipping prices listed are for the contiguous 48 US states only.

There may be additional postage required to ship items to Alaska, Hawaii,

Puerto Rico and other US territories. If additional postage is required, we will

contact you through email messages to let you know. If you live outside of

the contiguous US, please request a shipping quote prior to purchase to

avoid any delays in shipping your item. 

To keep our prices low, we will ship this item the best way possible. We ship with FedEx, UPS and USPS, and will choose the carrier that has the best rate and service to your area. Your tracking number will tell you how your item will be shipped.

We have been in business for over 30 years building some of the fastest race engines in the southeast with the best parts around and we are excited to now offer these parts to you at affordable prices. Our machinists are the best in the business and our sales staff is friendly and knowledgeable. Please give us a call with any questions about our items, we will be happy to talk to you about your project:

423-288-3881

  * Marked fields are required.
Qty*
Price $472.00
Reviews (0) Write a Review
No Reviews. Write a Review